20MHz Oscilloscope + Function Generator Back to index
|
|
FEATURES： |
Built-in 1MHz Function Generator |
|
|
20 MHz, Dual Channel |
|
|
High Sensitivity 1mV/DIV |
|
|
TV Synchronization |
|
|
Z axis input |
|
|
ALT Triggering Function |
|
|
CH1 output |
|
|
Economic Choice for High Quality |
Data Sheet
User Manual |
||
| SPECIFICATIONS | ||
|
|
Type |
|
| Phosphor | P31 | |
| Accelerating Potential | 2 kV | |
| Z-axis input | Sensitivity：Above 5Vpp | |
| Max. input voltage：30V (DC+AC peak) | ||
| Bandwidth：DC ~ 2MHz | ||
| Polarity | Positive-going input decrease | |
| Focus Control | Auto focus | |
| |
||
| FUNCTION GENERATOR |
Frequency Range | 0.1Hz ~ 1MHz (7range) |
| Waveform | Sine Wave, Square Wave, Triangle Wave | |
| Frequency Variable Range | 10：1 or more | |
| Output Impedance | 50Ω +10% | |
| Voltage | Over 14Vpp (open circuit) continuous conversion | |
| DC offset possible over + 6V when open | ||
| Sinewave Distortion | 2% Max. (10Hz ~ 100kHz) | |
| Squarewave Unsymmetry | +3% or less (in 1kHz maximum) | |
| Squarewave Rise/Fall Time | 50Ω output：120nS or less | |
| |
||
| VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V/DIV+3%, 1mV ~1V/DIV+5% (using x 5MAG) |
| Bandwidth | DC to 20MHz (x 5MAG：DC to 7MHz) | |
| Rise Time | Approx. 17.5nS (x 5MAG：Approx. 50nS) | |
| Max. Input | 300V (DC+AC peak) at 1kHz | |
| Input Coupling | AC, DC, GND | |
| Input Impedance | Approx. 1MΩ// 25pF | |
| Vertical Mode | CH1, CH2, DUAL(ALT, CHOP), ADD, CH2 INV | |
| |
||
| HORIZONTAL SYSTEM |
Sweep Time | 0.2µS / DIV ~ 0.5S / DIV+3%, (+5% at x 10MAG) |
| Max. Sweep Rate | 100nS / DIV (20nS and 50nS / DIV are uncalibrated) | |
| |
||
| TRIGGER |
Trigger Mode | AUTO, NORM, TV-V, TV-H |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Slope | "+" or "-" | |
| |
||
| X - Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+4% |
| X - axis Bandwidth | DC ~ 500kHz | |
| Phase Error | 3º or less from DC ~ 50kHz | |
| |
||
| OUTPUT SIGNAL |
Trigger Signal Output | Voltage：approx. 20mV / DIV into 50Ω |
| Bandwidth：50Hz to 5MHz (-3dB) | ||
| Impedance：Approx. 50Ω | ||
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
| |
||
| POWER SOURCE | AC 115V / 230V + 15%, 50/60Hz | |
| |
||
| ACCESSORIES |
Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2, |
|
| |
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.5kg | |
