50 MHz Oscilloscope Back to index
|
|
|
FEATURES : |
50 MHz, Dual Channel |
|
Delayed Sweep |
|
Built-in Delay Line |
|
TV Synchronization |
|
Z axis input |
|
ALT Triggering Function |
|
Hold off Function |
|
Trigger level lock function |
|
CH1 output |
Data Sheet User
Manual |
||
| SPECIFICATIONS | ||
|
|
Type |
|
| Phosphor | P31 | |
| Accelerating Potential | 12 kV | |
| Illumination | Continuously adjustable | |
| Z-axis input | Input Impedance : Approx. 5kΩ | |
| Sensitivity : Above 3Vp-p | ||
| Bandwidth : DC ~ 5MHz | ||
| |
||
| VERTICAL SYSTEM |
Sensitivity | 5mV ~ 5V/DIV +3%, 1mV ~ 2mV/DIV +5% |
| Bandwidth | DC ~ 50MHz | |
| DC ~ 15MHz at 1mV ~ 2mV/DIV | ||
| Rise Time | 7nS (23.3nS at 1mV ~ 2mV/DIV) | |
| Signal Delay | Leading edge can be monitored | |
| Input Impedance | Approx. 1MΩ | |
| Input Coupling | AC, DC, GND | |
| Vertical Mode | CH1, CH2, DUAL, CH2 INV, ADD.(Dual automatic switching ALT and CHOP) | |
| |
||
| HORIZONTAL SYSTEM |
A (main) Sweep Time |
0.1µS ~ 0.5S / DIV+3%,
100nS ~ 50mS / DIV+5% (x 10MAG), 10nS ~ 50nS/DIV+8% (x 10MAG) |
| B (delay) Sweep Time |
0.1µS ~ 0.5mS / DIV+3%,
100nS ~ 50µS / DIV+5%(x 10MAG), 10nS ~ 50nS / DIV+8% (x 10MAG) |
|
| Delay Time | 1µS ~ 5mS, +5% | |
| Delay Time Jitter | Better than 1:10000 | |
| |
||
| TRIGGER |
Trigger Mode | AUTO, NORM, SINGLE |
| Trigger Source | CH1, CH2, ALT, LINE, EXT | |
| Trigger Coupling | AC, DC, HR, REJ, TV | |
| Trigger Slope | "+" or "-" | |
| |
||
| X-Y OPERATION |
Sensitivity | 5mV ~ 5V / DIV+ 4% |
| X-axis Bandwidth | DC ~ 2MHz | |
| Phase Error | 3º or less from DC ~ 100kHz | |
| |
||
| OUTPUT SIGNAL |
Trigger Signal Output | Voltage : approx. 50mV / DIV into 50Ω |
| Calibrator Output | 1kHz Squarewave, 2Vpp+2% | |
| |
||
| POWER SOURCE | AC 100V / 120V / 220V / 230V + 10%, 50 / 60Hz | |
| |
||
| ACCESSORIES | Power cord x 1; Instruction manual x 1 ; Probes(10:1/1:1)x2 |
|
| |
||
| DIMENSIONS & WEIGHT | 310(W) x 150(H) x 455(D) mm；Approx. 8.2kg | |
